7 Steps To Beautifully Painted Flea-market Finds

Even the designers on TV are doing it; finding great furnishing at flea-markets, charity shops, and yard sales. Often, a wonderful piece of furniture can be had for mere dollars, especially if its finish is in desperate need of some TLC. Unfortunately, the design shows on TV don’t show you all the proper steps for refreshing your finds. Take the time to do it right, and your “new” furniture will have friends wondering where you shop!

1. Safety first: Before you disturb any painted surface, you should think about the possibility of lead. Lead paint additives were phased out in the 1970’s and 80’s. If you suspect lead is present in any paint, you can find information about safety precautions and testing at www.epa.gov/lead, or by calling the National Lead Information Center at 1-800-424-LEAD. Even with newer surfaces, I find that a dust mask is always in order when sanding. Your lungs will thank you.

2. Sanding: Not all pieces will require sanding before repainting. My mantra is to leave well enough alone when dealing with old paint surfaces. If, however, the paint is chipped, peeling, crackling, or has other problems, you might not be able to avoid the sandpaper. A small electric hand sander is my best friend for these situations. A very light sanding (really just scuffing) can help your new paint adhere to old oil paint or a glossy surface.

3. Prep, prep, prep: The number one reason for paint failures is incorrect preparation. Time spent on prep will ensure you get a good result in the end. Make sure the surface is completely clean and dust free before you ever get the paint out of the can. If you have sanded the surface, remove dust with a tack cloth. This is a small piece of cheesecloth soaked in wax, available at your local home improvement store in the paint section. They cost around one dollar…get several to keep on hand for the next project! If you can’t find one, several thorough passes with a damp cloth followed by another pass with a dusting cloth can do the job. Most importantly, don’t rush your prep work.

4. Taping: Carefully tape off any areas you don’t want painted, and burnish the tape edges down once, firmly, with a fingernail. If you think you might have to leave the tape on for more than a day or so, use a lower adhesion tape made for delicate surfaces.

5. Priming: If the piece is unpainted, consider a coat of primer before you paint. There are excellent primers specifically made for stone and metal. Tell your paint store rep what you’re painting and follow her advice. Use a good latex or oil-based primer for wood surfaces. Some wood grains (pine or cheaper grades of oak, for example) may “rise” after a first coat of latex, and priming improves the chances that you can avoid this. The raised grain will feel rough. If this happens, you’ll need to sand the grain down lightly and prime again. Don’t worry; it’s not as bad as it sounds when you know what happened!

6. Painting: Finally, time to paint! Use a good quality paint brush. Be careful not to overload your brush with paint and put it on too thickly. This is a common mistake. Painting in thick layers can lead to ugly drips, cracks, or drying delays. Instead, paint in thin coats, allowing time for each coat to dry completely before recoating. This will give you a beautiful and strong surface.

7. Curing: Follow the instructions on your paint can to make sure your new furniture is safely cured before you begin to use it or place objects on top of it. Paints, latex in particular, can feel dry well before they really are. When in doubt, I like to wait 24-48 hours before I place my newly painted flea-market beauties into service.

Now, enjoy your new furnishings. Use them well and never fear; if they get chipped or you tire of the color, you know how to fix it!


About the author:
© 2005 Michel Laurine. Michel Laurine is a faux finisher and decorative painter who enjoys sharing her love of color and helping clients personalize their homes. http://www.greatwallschicago.com


Source: Article Directory

Hiring A Contractor - 10 Tips
A very smart attorney I know paid $7,000 for a roof repair, only to have the roof leak the next time it rained. The contractor stalled, made excuses, but never did a thing about it. Anyone can have these kinds of problems when having repairs or improvements done, but to make it less likely, avoid the folowing mistakes when hiring a contractor. 1. Not knowing what you want. If you don't know what you want, you might not like what you get. Also, if you change your mind and change the job halfway through, the contract - and price - have changed (Hint: it won't get cheaper). Know clearly what you want done. 2. Not getting everything in writing. You don't want to hear, "I didn't say I was going to include the gutters." 3. Not having dates in the contract. Did you want it fi...

Bathroom Remodeling Made Easy
(ARA) – These days, you can’t turn on the TV without viewing a new episode of home improvement shows like “Trading Spaces” or “Hometime.” A report issued this year by Harvard’s Joint Center for Housing Studies calls home improvement the new “great national pastime.” In 2001, Americans spent an estimated $214 billion on home improvements, maintenance and repairs. All indicators point to this remodeling-mania continuing for sometime. Take a look around your own home. Is what you’ve been referring to as your “time-honored home décor” really just old fashioned? If so, maybe it’s time for you to join the remodeling parade. The good news is: there are lots of easy, low cost ways to give your home’s look a nice pick-me-up. The bathroom is one of the most popular targets for home improvement. While any project involving plumbing tends ...

How Stained Glass Can Add Elegance To Your Home
If there is one way to throw a new light on your home, it'sthrough the stained glass you put in your windows. Whetheryou want to enhance old windows by replacing some of thepanes, or are complementing the new Pella windows you'veinstalled, stained glass can lend an air of grace and quietelegance to a room.Where and how you incorporate stained glass into a windowtreatment depends a great deal on the style of windows youhave, and what you want to spend to achieve that multi-colored glow.In an older home that has wood framed windows with six ornine panes, it's possible to take out the upper row ofglass, and replace those panes with new ones cut from older<...